# Topping vs LST: it depends on the cultivar, so test yours

> Topping and low-stress training (LST) both aim for a flat canopy of many tops in good light, and no study shows one is better. After thousands of cultivars, our experience is that the response is highly individual and appears genetic: some hazes shrug off heavy clone-taking, others crash from losing a limb (grower-reported). The research is single-cultivar: one controlled study on large greenhouse plants found pruning twice raised yield per plant. Many growers start with LST because it's reversible. Test your own cultivar with split clones.

- Canonical: https://genetixbay.com/knowledge/training/topping-vs-lst.html
- Category: Training · Level: Intermediate
- Evidence: Grower practice · Status: Draft: awaiting expert review
- Stage: Veg · Systems: Any system
- Updated: 2026-11-02 · Licence: CC BY-SA 4.0 (https://creativecommons.org/licenses/by-sa/4.0/), attribute "GenetixBay Knowledge Base (genetixbay.com/knowledge)"

## Questions and answers

**Is topping or [LST](https://genetixbay.com/knowledge/glossary/lst.md) better?** No study shows either is better, and the response varies by cultivar. Both create a [flat canopy](https://genetixbay.com/knowledge/glossary/even-canopy.md) with many tops in good light. LST does it without cutting, so there's no recovery time and it can be undone; topping breaks [apical dominance](https://genetixbay.com/knowledge/glossary/apical-dominance.md) faster but costs a few days. Many growers start with LST because it's reversible. Test your cultivar with split clones.

**Why do some cannabis plants handle topping badly?** Cultivars differ in how they respond to losing their [growing tip](https://genetixbay.com/knowledge/glossary/apical-meristem.md) or limbs. In our experience some [hazes](https://genetixbay.com/knowledge/glossary/haze.md) shrug off heavy clone-taking and cutting without slowing, while other cultivars stall or even die from the loss of a limb. Stress, small root systems and topping too young make it worse. Watch recovery speed on a test plant before topping a whole room.

**Does topping increase yield in cannabis?** Sometimes. In the one controlled study, on large greenhouse plants of a CBD-dominant medical cultivar, pruning twice raised flower yield per plant, with [cannabidiolic acid](https://genetixbay.com/knowledge/glossary/cbda.md) rising from 14.1 to 22.4 g per plant. That's one cultivar; small indoor plants and high-THC cultivars weren't tested, and responses vary by cultivar. An even canopy in strong light is what drives yield.

**How do I test topping vs LST on my cultivar?** Take matching clones from one mother, root them together, then train half by topping and half by LST, with the same pots, light, feed and [veg time](https://genetixbay.com/knowledge/glossary/veg-time.md). Record days to recover, days to a full flat canopy, top-cola size and final [dry yield](https://genetixbay.com/knowledge/glossary/yield.md) per plant, and lab-test both if you can. Repeat once before trusting the result, and post it as a GenetixBay grow journal.

**What is LST?** Low-stress training bends and ties stems outward and down so the plant grows as a flat, even canopy without cutting anything. Side branches rise to meet the bent main stem, giving many tops at the same height under the light. It suits autoflowers and cultivars that recover slowly from cutting, and it pairs with a screen ([SCROG](https://genetixbay.com/knowledge/glossary/scrog.md)).

**Short answer, in plain words.** Topping (cutting off the top) and LST (bending and tying the plant down) chase the same thing: **lots of tops at the same height, all in good light**. LST gets there without cutting. **No study shows one is better.** After thousands of cultivars, our experience is that the response is **highly individual and appears genetic**: some hazes lost heavy clone-taking "without blinking", while other cultivars crash or even die from losing a limb (grower-reported, GenetixBay) [6]. Many growers start with LST simply because it's reversible. The honest answer: **test your own cultivar.**

> **Greenleaf says:** There's no universal winner. Your cultivar decides, so let a split-clone test tell you.

## What do topping and LST each do?

Both break the plant's habit of growing one [main cola](https://genetixbay.com/knowledge/glossary/cola.md). *Established (plant physiology).*

- **Topping** removes the growing tip. The tip makes auxin that suppresses the side buds below it (apical dominance); take the tip away and the two shoots below take over [5].
- **LST** bends the main stem sideways and down. The tip is no longer the highest point, so side branches rise to meet it, and the canopy flattens without a cut.
- **Why it pays:** light falls off down the canopy, yield follows light [4], and lower, shaded buds have lower [cannabinoid](https://genetixbay.com/knowledge/glossary/cannabinoid.md) concentration [1]. A flat canopy puts more bud sites in strong light.

**Topping vs simple LST**
- **Topping** (Cut the tip)
  - Pro: Fast, predictable split into two main tops
  - Pro: Pairs well with SCROG
  - Con: Recovery time: days of slower growth
  - Con: Some cultivars handle losing tips or limbs badly (grower-reported, GenetixBay)
  - Con: Risky on stressed or small plants
- **Simple LST** (Bend and tie)
  - Pro: No cut, no recovery stall
  - Pro: Reversible: ties can come off
  - Pro: Adjustable every few days
  - Con: Needs regular attention in veg
  - Con: Stems lignify; bend early
  - No study picks a winner; test your cultivar.

## What does the research show?

Not much, and nothing comparing topping with LST directly. *Supported for canopy shape; grower practice for the comparison.*

- **Pruning can raise yield on large plants.** On large (about 2.5 m) greenhouse plants of a CBD-dominant medical cultivar, pruning twice was the only architecture treatment that raised flower yield per plant, with cannabidiolic acid rising from **14.1 to 22.4 g per plant** [1]. One cultivar, one setting.
  - *How it was run:* one high-CBD cultivar ('Topaz'), 6 plants per treatment in 13 L pots at 1 plant/m², in a commercial greenhouse with supplemental light and [drip irrigation](https://genetixbay.com/knowledge/glossary/drip-irrigation.md) to about 30 % [drainage](https://genetixbay.com/knowledge/glossary/runoff.md). All 8 treatments, the unpruned control included, got the **same 63 days of veg** (24 h light), were switched to 12 h light on the same day and harvested 58 days later [1].
  - *What "pruned twice" means:* the single prune was a cut on transplant day, leaving 6 main branches; the double prune added a second prune **at the flip**, with no veg recovery time. Only the double prune raised flower and cannabinoid yield per plant; the **single prune made no significant difference** [1].
  - The paper also says harvest came 111 days after planting, which doesn't match 63 + 58 = 121 days; we report the stage lengths as stated in its methods [1].
- **Opening the canopy evens out potency.** Removing lower branches and leaves let more light in and raised cannabinoid concentration in the lower buds, improving uniformity [1][2].
- **Density changes the answer.** Higher [planting density](https://genetixbay.com/knowledge/glossary/plant-density.md) increased yield per area but reduced cannabinoid uniformity, and architecture treatments interact with density [3].
- **No study has compared topping with LST,** or tested small indoor plants and high-THC cultivars the same way.

**The one controlled pruning result.** 14.1 → 22.4 g: CBDA per plant with pruning twice (Large greenhouse plants, one [CBD](https://genetixbay.com/knowledge/glossary/cbd.md) cultivar); 0: Controlled studies comparing topping with LST. Source: [1]

## Why is it cultivar-dependent?

Plants differ in how quickly they regrow from a cut and how much leaf and root they can afford to lose. After thousands of cultivars, the response looks highly individual and appears to be genetic (grower-reported, GenetixBay) [6]. In our experience, some hazes kept growing through heavy clone-taking as if nothing happened, while other cultivars stalled for days or died after losing a limb (grower-reported, GenetixBay) [6]. Young, stressed or [root-bound](https://genetixbay.com/knowledge/glossary/root-bound.md) plants recover worse (see [recovery after topping](https://genetixbay.com/knowledge/answers/recovery-after-topping.md)).

## How do I test my own cultivar?

A split-clone side-by-side. *Grower practice; the method GenetixBay uses for every open question.*

**Topping vs LST, the split-clone test.** Matching clones: Same mother, rooted together → Same everything: Pot, light, feed, veg time → Half topped, half LST → Record: Recovery days, canopy days, top size, dry yield → Repeat once, then decide. Source: GenetixBay grow-journal method [6]

Record: days until regrowth after topping, days to a full flat canopy, top-cola size, dry yield per plant, and a lab test if you can. Post it as a GenetixBay grow journal so others growing the same cut can compare.

## Common mistakes

- Topping every cultivar by default without watching how it recovers.
- Topping young, stressed or root-bound plants.
- Topping after the flip, when recovery costs flowering time.
- Bending lignified stems hard and snapping them (supercropping is a deliberate technique; see [LST](https://genetixbay.com/knowledge/training/lst.md)).

## Sources

1. Danziger N, Bernstein N. 2021. Shape matters: plant architecture affects chemical uniformity in large-size medical cannabis plants. Plants 10(9):1834. https://doi.org/10.3390/plants10091834
2. Danziger N, Bernstein N. 2021. Plant architecture manipulation increases cannabinoid standardization in 'drug-type' medical cannabis. Industrial Crops and Products 167:113528. https://doi.org/10.1016/j.indcrop.2021.113528
3. Danziger N, Bernstein N. 2022. Too dense or not too dense: higher planting density reduces cannabinoid uniformity but increases yield/area in drug-type medical cannabis. Frontiers in Plant Science 13:713481. https://doi.org/10.3389/fpls.2022.713481
4. Rodriguez-Morrison V, Llewellyn D, Zheng Y. 2021. Cannabis yield, potency, and leaf photosynthesis respond differently to increasing light levels in an indoor environment. Frontiers in Plant Science 12:646020. https://doi.org/10.3389/fpls.2021.646020
5. Taiz L, Zeiger E, Møller IM, Murphy A. 2015. Plant Physiology and Development, 6th ed. (auxin and apical dominance). Sinauer Associates.
6. GenetixBay. Grower-reported field experience (house position).
