[
 {
  "id": "kb-ph-ec-meter-calibration",
  "type": "entry-encyclopedia",
  "title": "pH and EC meter calibration: buffers, slope, storage and when to replace a probe",
  "container-title": "GenetixBay Knowledge Base",
  "publisher": "GenetixBay",
  "author": [
   {
    "literal": "GenetixBay"
   }
  ],
  "URL": "https://genetixbay.com/knowledge/ph-ec/meter-calibration.html",
  "version": "2026-10-31 (28e460ad52)",
  "language": "en",
  "abstract": "Calibrate pH meters with at least two fresh buffers that bracket your readings (pH 7 then pH 4 for growing), before any session where decisions matter and at least weekly. Store glass pH probes wet in storage solution or pH 4/7 buffer, never in RO water or dry. Check EC meters against a 1.413 mS/cm standard. A pH probe with a slope below about 90-95% or one that can no longer be adjusted to buffer should be replaced; typical glass electrodes last one to two years.",
  "license": "CC BY-SA 4.0 (https://creativecommons.org/licenses/by-sa/4.0/)",
  "note": "First published 2026-10-31. Review status: Draft: awaiting expert review.",
  "issued": {
   "date-parts": [
    [
     2026,
     10,
     31
    ]
   ]
  }
 }
]
