[
 {
  "id": "kb-equipment-calc-ventilation-and-carbon-filters",
  "type": "entry-encyclopedia",
  "title": "Calculate it properly: exhaust fan CFM, intake size and carbon filters",
  "container-title": "GenetixBay Knowledge Base",
  "publisher": "GenetixBay",
  "author": [
   {
    "literal": "GenetixBay"
   }
  ],
  "URL": "https://genetixbay.com/knowledge/equipment/calc-ventilation-and-carbon-filters.html",
  "version": "2026-11-01 (f352ca4022)",
  "language": "en",
  "abstract": "Size an exhaust fan for the bigger of two numbers: one air change a minute (CFM = tent volume in ft³) or the heat it must carry out (CFM = BTU/h ÷ (1.08 × temperature rise in °F)). For a 4×4×6.5 ft tent that's 104 CFM for air changes but about 190 CFM to carry 600 W of heat out at a 10 °F rise. Then allow for the carbon filter, ducting and bends using the fan's curve. Use passive intakes about 2–3 times the exhaust duct area for slight negative pressure.",
  "license": "CC BY-SA 4.0 (https://creativecommons.org/licenses/by-sa/4.0/)",
  "note": "First published 2026-11-01. Review status: Draft: awaiting expert review.",
  "issued": {
   "date-parts": [
    [
     2026,
     11,
     1
    ]
   ]
  }
 }
]
